Crosspost from: http://vedder.se/forums/viewtopic.php?f=7&t=196&sid=c63cf39146f16b46f898ea102e1150f8
Hello,
I got a VESC here which I made myself.
I can't get it to detect any motor and during the troubleshooting I found that one phase is siting much higher then the others.
The motor detection keeps on coming back with failed detection and is not able to spin up the motor no matter what the settings are. This is in BLDC as well as FOC.
I attach a picture of the BEMF plot.
I would be gratfull about any help, as I am at the end of my wisdom.
Thank you, Svenska
Hello,
I got a VESC here which I made myself.
I can't get it to detect any motor and during the troubleshooting I found that one phase is siting much higher then the others.
The motor detection keeps on coming back with failed detection and is not able to spin up the motor no matter what the settings are. This is in BLDC as well as FOC.
I attach a picture of the BEMF plot.
I would be gratfull about any help, as I am at the end of my wisdom.
Thank you, Svenska