having a specific issue with my knock-off HI200 driving my Tmotor U15 (36N42p) on the Mongoose Blackcomb build. 15s5p Molicel p42a battery pack.
after watching the Ben Vedder vid on setting up parameters for that motor (thanks to kubark42), it's basically all good, and motor winds right up as it should, but with anything other than very gradual deceleration, the vesc is throwing a one second red light with a bit of clunk from the motor...
experimenting with conservative, and higher, amp and voltage settings has zero effect on this phenomenon. must be some occult flux, switching, observer issue that could likely be solved in 30 seconds by the cognoscenti...
after watching the Ben Vedder vid on setting up parameters for that motor (thanks to kubark42), it's basically all good, and motor winds right up as it should, but with anything other than very gradual deceleration, the vesc is throwing a one second red light with a bit of clunk from the motor...
experimenting with conservative, and higher, amp and voltage settings has zero effect on this phenomenon. must be some occult flux, switching, observer issue that could likely be solved in 30 seconds by the cognoscenti...