VOTOL FIRMWARE (apk, software, .bin, .ini)

[MatrixReloxu]

Hello everyone on this forum, I created this topic with the intention of helping and spreading knowledge. I had a lot of difficulty finding solutions for my Votol EM50SP, but now I've found what I needed through a YouTube channel called VINO - Votol Monitor Z.

I will be providing a link to my Mediafire with a pack containing .bin, .ini, .apk files and versions of the Votol software. If this helps you in any way, then this post was worthwhile. Cheers.

MediaFire

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

www mediafire com /folder/ea7roialtzie3/Mega_Pack_VOTOL_Software

 

[amberwolf]

This should be helpful to various people, but Mediafire is known for removing content over time (as are most other content hosts, causing extensive link rot problems with otherwise useful posts like these).

If you are willing to, you can put the files directly here on ES as one or more ZIP files. If you find that a single file is too large to upload, you could do it by folder or file type, as big as will fit in one post. That way anyone that finds your thread will also have direct access to the files, without depending on an external site that may or may not exist then.

I would have gone ahead and done it directly but mediafire does not allow me to access more than a single file at a time, and I don't have enough spare time to dig into every folder to ensure all the many files get archived.

 

[MatrixReloxu]

This should be helpful to various people, but Mediafire is known for removing content over time (as are most other content hosts, causing extensive link rot problems with otherwise useful posts like these).

If you are willing to, you can put the files directly here on ES as one or more ZIP files. If you find that a single file is too large to upload, you could do it by folder or file type, as big as will fit in one post. That way anyone that finds your thread will also have direct access to the files, without depending on an external site that may or may not exist then.

I would have gone ahead and done it directly but mediafire does not allow me to access more than a single file at a time, and I don't have enough spare time to dig into every folder to ensure all the many files get archived.

Thanks dude, i didn't know about that, i'll be looking for that.

 

[MatrixReloxu]

folder\MEGA PACK VOTOL SOFTWARE
|
I >> .apk
| ㅤ .bin Pack
| ㅤ | ㅤ .ini Pack
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |
| ㅤ | ㅤ |>>7255config.ini
| ㅤ | ㅤ |>>Config 80s 7 bin.ini
| ㅤ | ㅤ |>>Config 100GTR 72400 NEW from Orig Soft.ini
| ㅤ | ㅤ |>>ConfigGLE em-150180A.ini
| ㅤ |
| ㅤ |>>2.32-1.13_William_Padron.rar
| ㅤ |>>2.33 VOTOL_MAGIC.rar
| ㅤ |>>2.33_4.1hu._V4_FILE_logic_2023xx_DEBUG_SW_2.33.rar
| ㅤ |>>CAN_63 VOTOL_MAGIC.rar
| ㅤ |>>CAN_x2 VOTOL_MAGIC.rar
| ㅤ |>>EM 50S 2.33.rar
| ㅤ |>>EM50-7255.rar
| ㅤ |>>EM100-72350.rar
| ㅤ |>>EM100S VOTOL_MAGIC.rar
| ㅤ |>>EM-100S_Firmware_73_55.rar
| ㅤ |>>EM150-3(CAN_BOOT)_HALL_30.rar
| ㅤ |>>EM150-3(CAN_BOOT)_HALL_94.rar
| ㅤ |>>EM150SP-Marc-Olivier Fecteau.rar
| ㅤ |>>EM234-203-10 William Padron.rar
| ㅤ |>>Self Learning William Padron.rar
| ㅤ |>>V3 V4 Firmware 66-8 William Padron.rar
|
| >> Votol apk.rar

= The uploaded file is too large for the server to process
= Uploaded

 

[MatrixReloxu]

folder\MEGA PACK VOTOL SOFTWARE
|
I >> .apk
| ㅤ .bin Pack
| ㅤ | ㅤ .ini Pack
| ㅤ | ㅤ |ㅤ Info
| ㅤ | ㅤ |ㅤ |ㅤ Software
| ㅤ | ㅤ |ㅤ |ㅤ |
| ㅤ | ㅤ |ㅤ |ㅤ |>>readme.txt
| ㅤ | ㅤ |ㅤ |ㅤ |>>Basic knowledge.pdf
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Monitor N 2.0.1rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>EM_V3-sport-9 XY-03-P.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>EM_VINO_V1_2025_Final_Dongwei.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Vino-USB-full driver.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.1.9 x86 duo.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.2.0 vi.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.2.0 x64.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.2.0 x86 duo.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.2.1 EN.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.2.2 EN.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.2.5 EN.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>Votol Vino 0.5.1.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>EM_V3-37.rar
| ㅤ | ㅤ |ㅤ |ㅤ |>>EM_V3-49.rar
| ㅤ | ㅤ |ㅤ |
|ㅤ | ㅤ |ㅤ |>>EM30SP 50SP.rar
|ㅤ | ㅤ |ㅤ |>>EM-70.rar
|ㅤ | ㅤ |ㅤ |>>EM100SP 150SP.rar
|ㅤ | ㅤ |ㅤ |>>EM200SP.rar
|ㅤ | ㅤ |ㅤ |>>EM300SP.rar
|ㅤ | ㅤ |ㅤ |>>Other PDF.rar
| ㅤ | ㅤ .
| ㅤ | ㅤ .
| ㅤ |
| ㅤ .
| ㅤ .
| ㅤ .
.
.
.


= The uploaded file is too large for the server to process
= Uploaded

 

[MatrixReloxu]

The last one...

 

[amberwolf]

Thanks! Now we've got a thread to point people to for the votol stuff nobody ever has.

 

[Dryden]

Great job!

You know how the app work? With wich dongle?

Thanks

 

[skrubis]

Thanks for sharing! I did come across these some time ago by searching online trying to revive a bricked vootl em-50 unsuccessfully by writing the bin over swd, however unsuccessfully. I even swapped out the MCU to the same part out of a hoverboard controller, but same result- firware wrote successfully, swd programmer was able to write the binary successfully, recognize mcu, but the controller stayed dead to uart comms. Some people on youtube were fixing these by flashing a new bin, any clues on what may be going wrong here?

 

[aleks!]

Thanks, very good. You are a cool guy.

 

[selamib]

Hello everyone on this forum, I created this topic with the intention of helping and spreading knowledge. I had a lot of difficulty finding solutions for my Votol EM50SP, but now I've found what I needed through a YouTube channel called VINO - Votol Monitor Z.

I will be providing a link to my Mediafire with a pack containing .bin, .ini, .apk files and versions of the Votol software. If this helps you in any way, then this post was worthwhile. Cheers.

MediaFire

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

www mediafire com /folder/ea7roialtzie3/Mega_Pack_VOTOL_Software

Impossible to calibrate speed display with the app :/

 

[Italian rider]

Good morning everyone, I am new to this world of controllers, and I also purchased a VOTOL EM 50-4. What program do I need to set it up? The website where I bought it didn’t tell me anything and isn’t responding anymore.
Are the files uploaded above still okay?
Thanks to anyone who can help me!

 

[Italian rider]

Great job!

You know how the app work? With wich dongle?

Thanks

Ciao , sei italiano? sei riuscito a risolvere con il tuo VOTOL?

 

[MatrixReloxu]

Great job!

You know how the app work? With wich dongle?

Thanks

From what I know, Votol's mobile app is quite complicated to get working; if I'm not mistaken, you need to register and receive some kind of authorization. Fardriver is light-years ahead when it comes to mobile apps.

 

[MatrixReloxu]

Good morning everyone, I am new to this world of controllers, and I also purchased a VOTOL EM 50-4. What program do I need to set it up? The website where I bought it didn’t tell me anything and isn’t responding anymore.
Are the files uploaded above still okay?
Thanks to anyone who can help me!

I believe that on the SiAECOSYS website they have Votol software; it's usually the first place people find it.

 

[MatrixReloxu]

Great job!

You know how the app work? With wich dongle?

Thanks

Unfortunately, I couldn't use this app; it requires things I don't have access to. However, I made it available in case someone who knows how to use it can download it. I access it via computer using an EC-05 Bluetooth module.

 

[MatrixReloxu]

Impossible to calibrate speed display with the app :/

The app is very limited; I wish Votol had the same level of app quality as Fardriver.

 

[breily]

Hi. Thanks for providing all the files for Votol. But I wanted to ask if you or anyone else has the Bin files for direct ECU programming, via ST Link for example. The Bin files that are uploaded aren't fully compatible; they work from the official app, but they're not valid for direct programming. I've seen some videos on YouTube and noticed that those Bin files are around 128kb, while the ones here are only 40-60kb.

 

[Pride]

Hello. Does anyone have the firmware file for the Votol EM200/2SP controller? I accidentally uploaded the firmware from the Votol EM100 controller.

 

[DeNew Lab]

If anyone has any firmware for Votol, I would be very grateful!

 

[minde28383]

once you install apk and try to login accounts needs to be approved by end service. Who is contact? Who successfully did so and did it happened automatically after entering verification code? how long needed to wait? whom to contact so that approve is established?

?are they the contact for accounts approves: info@votol.cn

MatrixReloxu, thanks for apk.

 

[fredtr]

I have an older EM-200sp, do you know where I can find current firmware of an older, compatible version of EM configuration software? I can communicate with the controller with EM_V60 and EM_V3-EMsport, but it isn't compatible, when I do a write params, with voltage changes it clears throttle and start settings. When I set the throttle and start settings and do a write params the next time I connect they are back to 0. V6 shows SW: 2.2 and hardware: 1.03. Thank-you.

 

[minde28383]

1. which file is correct firmware for votol em200 2sp controlller CAN version?

2. what is >>Self Learning William Padron.rar file? How to use it? File name implies that it should be for self learn ie to initiate self learn? Why separate file for self learn?

 

[Tvilnielsen]

Anyone have firmware for an EM-70?

 

[danula]

do you have any firmware for votol EM85 controller?