Wanted: Trade BBSHD/BBS02 motors, your 100mm (or 83mm) for my 68-73mm

[kungpho]

I'm swapping bike frames and have a 68mm BBSHD, where I need a 100mm or 83mm.

If anyone out there is in the opposite situation, I'd love to swap motors, or housings.

Also open to a trade for a BBS02.

Located in Seattle.

 

[classicalgas]

I'm just north of Bellingham, with a fatbike BBSHD (I think) I probably wont use. Is that close enough that I should go dig it out of the box to check?

 

[kungpho]

Yeah, that would either be 100 or 120. If 100mm I think it would work well.

 

[classicalgas]

Yeah, that would either be 100 or 120. If 100mm I think it would work well.

I'll go take a look

 

[classicalgas]

Yeah, that would either be 100 or 120. If 100mm I think it would work well.

So it's a 100mm BBSHD from Luna, I may have paid for the power upgrade, but not sure. I found the cranks, but I'm going to have to dig for the locking rings and spacers. Not sure where the throttle and panel are, but if you want to trade, just keep yours.

I'll be down in Seattle (downtown ) in a couple weeks, but it will be a flying visit.

I got an electric motorcycle ( Lyric Voodoo) a few months ago, don't really need a high power e bike at this point. Your standard width BBSHD would be a better fit in a cruiser or mountain bike frame than the fatbike one I've got. Or maybe in a trike/velomobile

 

[kungpho]

Word, thanks for checking on that. Shoot me a DM and we can keep in touch about your Seattle visit.

 

[classicalgas]

Word, thanks for checking on that. Shoot me a DM and we can keep in touch about your Seattle visit.

scot-laughlin@comcast.net.

Where in Seattle are you?