whatever
100 kW
- Joined
- Jun 3, 2010
- Messages
- 1,297
Just trying out an older model xie cheng controller with crystalyte 408, had an unusual problem, controller would cut out under load,
only thing I could think of was the regen wire was involved, cut the regen wire and bingo controller works fine.
Regen wire was yellow colour, grounded via brake handle to black ( earth) throttle wire. I haven't opened up controller to see where the yellow wire goes
on the board. Anyone else had similar issue? its 6 fet xie cheng
only thing I could think of was the regen wire was involved, cut the regen wire and bingo controller works fine.
Regen wire was yellow colour, grounded via brake handle to black ( earth) throttle wire. I haven't opened up controller to see where the yellow wire goes
on the board. Anyone else had similar issue? its 6 fet xie cheng
