Search results

Date Relevance Most replies

  1. migueralliart

    Sanyo 18650GA low voltage cutoff

    I run my battery packs based on two things: Capacity - Using the CA is the best thing ever since you can actually know how may AH you have discharged. From this measurement I try to discharge my pack to a 80% max, ie. if it is a 10AH pack I'll only discharge 8AH. LVC @ Max Controller Rating...
  2. migueralliart

    Good 14s R/C charger?

    hyperion 1420i is the one I've been using for 4 years. No problems whatsoever. I think the model has been discontinued thou.
  3. migueralliart

    Single-Speed Momentary Pushbutton Throttle?

    Lets just clarify it ... teklektik Hook it from 'throttle +5V' to 'thottle signal'. chas58 Just wire the ground and the 5v together to get full power as noted above. these two methods are different. Which one has worked before ?
  4. migueralliart

    Custom aluminum frame with 2.8kwh capacity

    Great build .. excellent welding and machining skills. Eager to see the end result.
  5. migueralliart

    7.5Kw Cyclone Ebike Motor Kit. Took on the 405 S. Freeway

    There is something off with this guy. I mean just the fact that he is shouting and celebrating riding on the freeway tells you that this guy is crazy.
  6. migueralliart

    Advice for newbie building on an EEB frame

    If that's the case then the MAC would be a good choice but the frame is not really hiding anything even on 26" rims it screams high power ebike as it resembles a MC build. To me what you're doing is buying a mustang with ALL the extras but with a 2.3 ecoboost engine (in american terms).
  7. migueralliart

    Enduro Ebike frame build

    I got the kickstand from powervelocity.com. When you remove the side cover look at the very bottom of the frame and there will be a nut welded in there but covered by the bottom plastic. You need to drill the plastic from the outside being careful not to drill into the threads. The kickstand...
  8. migueralliart

    Enduro Ebike frame build

    Got my front and rear brakes installed today. Fronts are zee hydraulics with 203mm rotors and rears are bb7 with also 203mm rotors. I wanted to have rear mechanical brakes just in case.
  9. migueralliart

    Advice for newbie building on an EEB frame

    If all you're gonna push thru is 40a at 48v then the mac makes sense but it depends on the amount of hills you have and cruising speed. Use the simulator and the actual weight and see if the bmc (torque or speed) will overheat or not. I like the frame but I'm going a bit more heavy duty with...
  10. migueralliart

    Advice for newbie building on an EEB frame

    My 2 cents... I would not go with a MAC motor with this frame. It seems all the vector,eeb frames being built in this forum are going with MC rims and a MXUS V3 or QS motor. The logic is that the frame is somewhat heavy and any weight you save with the motor will be negligible in the end since...
  11. migueralliart

    Enduro Ebike frame build

    Long time without building since I've been very busy working etc but finally decided to pull the trigger on one of the EEB enduro ebike frames and started ordering components and putting stuff together. Lots of thanks to powervelocity.com for the questions answered and support given with the...
  12. migueralliart

    New project. Trike, customer wants it to go fast

    I have the 20 inch front rims and hookworms with bb7 203mm front discs and a rear modded 9c on a 26" rim. If someone wants cruising speeds that high the KMX's were not built for that and will incur in modification and cost to get them comfy and safe. Its one thing to build these trikes to be...
  13. migueralliart

    New project. Trike, customer wants it to go fast

    I'll chime in since I have been riding my trike for some years now. If 40mph is the goal for some sort of cruising speed DO NOT GET A KMX trike. People will say its fun and all but a single bump, pot hole, distraction will be bad for you. The fastest I ride my trike cruising is 35mph with...
  14. migueralliart

    All black MP5

    That same mp5 all black hub is available from goldenmotor.ca
  15. migueralliart

    100+ Miles of Fun per Charge: 5.1kWh batt, 20kw capable

    I'm building one of these frames and purchased from powervelocity.com His support has been phenomenal and very straightforward. Right now I'm waiting on my front 19" wheel and rear 19" MXUS 4T that I purchased. I'm picking up an HS4065 with lyen 18 fet this weekend which I might try out with...
  16. migueralliart

    torque arm picture thread

    Sturdy as F, mxus 3kv2
  17. migueralliart

    LiPo VS. LiIon - THE BIG DISCUSSION

    To me LIPO is always for the fun rides .. LiIOn 18650 is for the commuter.
  18. migueralliart

    19" Motorcycle Wheels vs 26" Bicycle Wheels (rim and tires)

    I'm building an EEB frame at the moment and could justify using bicycle rims with it. I'm going with a MXUS V3 and a72V23AH battery so the weight will be the major factor. If I didn't have the V3 or long range pack then I'd go with a DH rim and tires but for now I feel safer going with a 19in...
  19. migueralliart

    GCinDC's Giant DH Comp

    Quite frankly the zoom forks are not that bad. The early EVG bikes had those and I ran one for a looooong time with no issues. Would I ride DH or freeride with them NO. Will they take city driving and light trail use most likely. I myself ordered one and will be running it with an EEB frame...
  20. migueralliart

    18650 battery Kit development and discussion[testing done]

    Let me start by saying this all looks VERY promising! And I for one will very possibly buy one. I got a couple of questions thou. Have you tested a single parallel module to see if the contacting area can withstand high currents? Another thing that worries me is that if for example in a...
  21. migueralliart

    Commuter Build Review

    Try having a flat on a KMX trike Which brings me to a good point. At 22 miles I think you'll be better off with a trike. The advantage of trikes is that you can cruise at a higher speed with less resistance hence you don't need such a big battery pack. Also your position is much more...
  22. migueralliart

    methods - I want to make something happen...

    Good to see you back and having fun hitting the waves.. I used to do that a lot while growing up in Puerto Rico. A word to motivate you: I can only remember a couple of names from this forum as "true" innovators and yours is in that list so keep pushing. Orlando
  23. migueralliart

    GT i-drive 4.0 Build

    I did some changes to my photobucket account and hence the links changed. I'll be updating the links soon :D
  24. migueralliart

    Anyone from Palm Beach Co, FL?

    I received your pm... Sounds like we could ride locally soon. Who else is on board.
  25. migueralliart

    HARDTAIL+9C clone Frame Build - (HD videos added 7/28/13)

    Sweet man ! Nice looking bike. Mine is still running strong. I have a different hub motor now but the rest is still working fine.
Back
Top