So I've setup everything and I am impressed. It's a small motor and quite powerful. However I have setup my LCD KT-LCD8H to 700C and the top speed on the throttle seems to be 17mph. Looking on the forums it should be about 18mph on 36V and 20-22mph on 48V. I am running a 48V battery and it shows 54V.
36V/48V 350W 6Mosfets 17A Brushless DC Sine Wave Controller from PSWpower
I have not actually put the motor in a rim yet, just the bare motor. So is the speed slower because it doesn't have the rotational mass? Or have I setup something incorrectly?
The display setting limit shows 72km/h, about 44mph so I'm sure i Must have done something wrong. I've played around with it using the throttle and it goes over 17mph up to 20 and then drops down to 17 as if it's limited somehow. I have disconnected the white "speed limited wire" but it makes no difference...
36V/48V 350W 6Mosfets 17A Brushless DC Sine Wave Controller from PSWpower
I have not actually put the motor in a rim yet, just the bare motor. So is the speed slower because it doesn't have the rotational mass? Or have I setup something incorrectly?
The display setting limit shows 72km/h, about 44mph so I'm sure i Must have done something wrong. I've played around with it using the throttle and it goes over 17mph up to 20 and then drops down to 17 as if it's limited somehow. I have disconnected the white "speed limited wire" but it makes no difference...