I don't understand much but what impresses me are 2 things.
On the second page of the program. (pict 1)
Values are from 34; 64. Your value is 196. I don't think it's true
I don't think your engine has bigger magnets than 40mm.
On the third page the pole pairs. (pict2)
I also don't believe you have so few fields. You are 16
And the angle of the hal sensor for you is 0, which I don't think is normal.
Values outside these limits damage the motor and the magnets are magnetized, causing the motor to be scrapped forever.
Probably not the correct settings have damaged your motor.
An expert in this is only LARSB, he can tell you exactly. This is the man who helped me a lot.
I see that you have opened the engine and you can probably count the number of magnetic pairs you have.
But, as I said before, I'm no expert else it will help if this is just my opinion and you should not apply it without being sure.