mr.pibb
1 W
- Joined
- Sep 15, 2012
- Messages
- 58
Hey guys. I got my lucky hands on either a v1 or v2 Yuba mundo. I will be making it a fat tire bike.
I found this thread on another site:
http://forums.mtbr.com/cargo-bikes/yuba-mundo-thread-749942-4.html
It pretty much means I can run a 3.5-4 inch tire in the rear with a nuvinci 360 axel and stock crank.
And I was thinking about putting a surly moonlander fork in the front with a hub motor. That way I could fit a crystalyte ht3525 in the front hub and also get a 4 inch tire too.
Does anyone see any downside from going with the nuvinci 360 in the back and the hub motor in the front?
I found this thread on another site:
http://forums.mtbr.com/cargo-bikes/yuba-mundo-thread-749942-4.html
It pretty much means I can run a 3.5-4 inch tire in the rear with a nuvinci 360 axel and stock crank.
And I was thinking about putting a surly moonlander fork in the front with a hub motor. That way I could fit a crystalyte ht3525 in the front hub and also get a 4 inch tire too.
Does anyone see any downside from going with the nuvinci 360 in the back and the hub motor in the front?