Hi
I have just finished a 16S6P pack that I would like to run through some testes before I wrap it completely up. The pack includes a bluetooth BMS where I can set pretty much most of the impotant parameters, and monitor each cell group. My 16S charger is of course stuck somewhere on its way from china.
My question is, what happens if I plug in a 20S 5A charger I have laying around here? Will it happily deliver 5A at 52V, or will magic smoke appear from the charger? I will set the cut off voltage in the BMS to around 4.1V per cell and stick around while monitoring through the BMS app. It wil just be for testing purpose to finish my pack build, and I wont be using the pack on a regular basis before the 16S charger appears. Not risking the fire if the BMS fails.
Asking for a friend, of course
I have just finished a 16S6P pack that I would like to run through some testes before I wrap it completely up. The pack includes a bluetooth BMS where I can set pretty much most of the impotant parameters, and monitor each cell group. My 16S charger is of course stuck somewhere on its way from china.
My question is, what happens if I plug in a 20S 5A charger I have laying around here? Will it happily deliver 5A at 52V, or will magic smoke appear from the charger? I will set the cut off voltage in the BMS to around 4.1V per cell and stick around while monitoring through the BMS app. It wil just be for testing purpose to finish my pack build, and I wont be using the pack on a regular basis before the 16S charger appears. Not risking the fire if the BMS fails.
Asking for a friend, of course