1boris

Nothing new? Looks like this motor must be very bad

Yes their torque rating is crazy.504 watt would be morel like 60nm.if your 500watt peaks at 900w it is same as Bafang bbs 500w which is...

It's all good so far. Nice and smooth power distribution. Torque sensing is also working as intended. The DZ41 display I wish it could...

Well they told me their 250w motor had 120nm of torque.when I asked about the controller they told me it was 36volt 14a controller.if...

Fake marketing is putting it lightly.

Hello, you can try with Besst. Pain with expiring passwords or python workaround though. Also since they swapped to EU servers it allows...

Leaks indeed! Speaking of, I now have 3 ultra firmware files :cool:. I was fortunate enough to be provided my original firmware (18.1)...

I had the Ananda m 100 motor,it was strong on low cadence.peak current shown in lcd was 920w.still the Bosch CX was faster.it looses...

I had both.Xf19 felt stronger and running cooler

How is the noise of the stealth vs photon? A bother at all? Could you compare the power of the 02 to photon? Which can sustain high...

If you want to unlock speed limit.just put a magnet on the pedal arm and move the speed sensor to the magnet on the pedal arm.worked...

The 250 and 350 bafang bbs is the same build.can adjust 250w controller up to 20a.at least on my version from pswpower.com

I think mxus xfc19 is better than Mac. It has 1:5.8 gearing bigger radius and more copper.I have tried both and Mac motor feels weaker...

At 15min 16sek

Yes ipm