eee291

If cruise control is active then a blip on the throttle should stop it. It can be changed in the settings via Bluetooth.

The Ignition wire goes to battery postive.

I think it's worth a try, save your settings with screenshots and/or in the app.

You can start by measuring the halls with a multimeter.

I was hoping you would post screenshots. The PC program allows you to change more settings the app, like motor temp. Did you try a...

You absolutely can do regen on a separate port BMS. The issue is that it can't prevent the P- port from taking a charge, that's why...

Could you post your settings? Maybe I can compare with mine and see what might be the issue. Another thing you could try is reset to...

I just set up my first fardriver controller last week and regen works fine. My only two complaints I have is the different names for the...

Maybe the battery is full and can't take any more regen until it is discharged somewhat.

How do we know this is the REAL NEPTRONIX... posting this.. and not some kind of savvy spammy rAi computer robot posing as Nep? Huh...

Pretty sure it's the standard 120° Was the app receiving frames during the cutout?

Could you give some info about the battery and BMS? Because you are trying to pull over 14kw from the battery. Does the controller...

You only need an email and 2 minutes to register. Type in your email and press get. After a few seconds you should receive a code, type...

It's always easier for me to identify a controller pinout from the wire ends rather than the PCB board. If you could snap a few pics of...

Probably a throttle overvolt protection for both of you. Change protection values in the program or add a resistor in the throttle line...