E-Moto Tuner

Pit bike maker Apollo Motorsports has released a 36v 1300w electric Pit Bike, top speed 25mph stock, with 12" wheels in the rear and 14"...

70A? 8 gauge would be ideal but you'll make it with 10 gauge if you cut right outside the axle and replace the rest of the strand with it.

#10 Gauge THHN Copper Stranded Wire is the most popular single conductor copper wire and RATED FOR 30 AMPS comes in several colors #8...

157 kms/h!! I very low torque but very high speed Lunyee 12 inches motor, running with a 22S 80V battery. If you see the video, the tire...

Question on extending phase wires for a 72v 3000w hub motor with a 70amp controller - needing to add 7 inches to the run to the junction...

Super nice build, I think you are going to end up loving the VESC ecosystem. Benjamin Vedder and all the too-numerous-to-mention...

It didn't feel sketchy at speed so it seems okay. I have a bottle of Ride-On Sealant/Balancer so I intend to add that to the rear wheel...

How was the rear rim at high speed with your fix on the bend?

While mounting the hub motor, I couldn’t reuse the zip ties I had on the old hub motor wiring as the new phase wires were double the...

Probably. That's too bad about the bent rim, hopefully they exchange it for you. Going from the 16" rim to the 17" rim how does it fit...

Theres' not much difference between the many different pastes, thermally. Most of these things just use the plain old titanium dioxide...

What is the proper type of thermal paste/compound/grease for the Controllers large heatsink to use? Needing to clean and reapply for the...

Looks like 6 pin Dj7022y-2.3 connector. You can get them from AliExpress like this listing...

I'm rewiring a 17" 3000w hub motor and it was missing the male connector for the hall sensors. Any experts out there that know what type...

I mixed & matched 2 different kits. Here's the links to the reflective stripes I used...