Recent content by gensem

Does gearsensor (deraileur version) and hydraulic brake sensors works with phaserunner? Do you plan to embedded phaserunner inside the BBSHD?

LMX 161 with working pedals planed?

Nevermind... looks like it was my connection.

I said 11g at first, but now im convinced to used 12g. But its going to be stainless for the time being. Im betting the rim walls can take it, but im not sure about hub motor ring. I ll take its going to have a better survivability than using 36 8g spokes.

Will be using 11g spokes instead of 8g for more flex and hoping for the best.

Meaningfully survival improvement coming from you means alot. :mrgreen: :mrgreen: :mrgreen:

After reading what all you guys said about racial lacing... Using Justin calculator, 72h single cross should be doable... spoke angles are pretty close to what I had using a cromotor in a 17" rim with 36 spokes. Btw, Today I found 17" 1.85 and 2.15 72h alloy rims made in Brazil, so no need...

17" one failed just riding at 40-60kmh. I was dialing Max-e controller and started to hear a metal noise... It was 3 spokes hitting the rim wall. 18" had a somehow better angle but failed when I went from the sidewalk to the road, 10cm jump. Im pretty sure its not going to handle Sao Paulo bumps...

19" should be doable... spoke angles would be close to a 205 in a 17" wheel. I did not go for a 19" for 3 reasons. - Hubmotor kV is high so you should use the smallest possible rim. - Using a 19" in the back would force me to use at least a 19" in the front and that would make my dual disks...

I ll try to do something like this in the coming weeks.

Q76R with left side sprocket, thats something I wanna see.

Not quite... I had a 17" and 18" rim failing on me because the spoke angles are too extreme. Neeples do not seat properly (angles are around 50-55degrees) and rips thru the rim wall. QS does not have a cast integrated wheel for 40h ebike motor atm. I ll try to get a brazilian rim manufacturer to...

A class C 63a on negative and positive should be enough.

Yep, 8g.

80mm but shorter would be better for a 17" rim. Shoulda fit a 18" rim nicely.