Recent content by josaphine30

I think that's it then. I'll get the Samsung battery and 10T Mac motor. It will be cheaper too as I will get it all from the same place. Thanks for all the help.

Yea that's the only thing I've noticed about the kit that may be a problem. I believe there is 15mm space between the hub and the inside of the disc, I'll have to measure my caliper today. Did you get a battery from him too?

I've been speaking to my parents and they don't like the idea of me going 30mph on a bike so that's that messed up. I think they would be okay with a maximum speed of 25. I would like to reach 25mph but still have quite a bit of torque. The 10T Mac motor will give me 25mph top speed but will...

The Samsung battery from Em3ev says discharge Current, recommended 35A or less. So will this one be okay with the 30A controller? It's a bit big but it would fit in my frame I think. Do you know of any 12v or 24v Samsung 14.35Ah batteries I could get to use in series to make it faster? (in...

I just had another thought. Em3ev say the 6fet 25A controller would be okay with the Mac motor but the 9fet 30A would be better. Would the 6fet 25A Controller work with the 15Ah Ping without damaging it? I'll be pedaling all the time too and I'll only be going 18-22mph most of the time.

Why would you not recommend the 48v 15Ah Ping with the Mac motor and 30A controller, would it be bad for the battery? I really like the Mac motor as it has high speed and torque but it will be expensive with the Triangle battery pack. Would the 50v 16.4Ah Rectangle Samsung pack work okay...

That's very good to know Dan, thanks. I chose the Ping batteries so I could buy 25V one from him in the future and use it in series to go even faster :D Do you think I'll need the upgraded BMS? Oh and I way 8.5 stone, that's around 120 pounds I think. Not sure how much my bike weighs.

Thanks. Em3ev recommend the 9fet 30A controller but say the 6fet 25A would be OK. I think I'll just try save enough money for the 15Ah battery and stick with the recommended controller. Do you have any idea what range and I would get with the Mac motor and 48V 15Ah battery? The top speed of...

Hi. I thought I had decided on a 500w direct drive kit from Em3ev along with the 50V Samsung battery from them. But I started looking at the Mac motor and Ping batteries, which means I have a lot more questions. Firstly. How does the Mac motor compare to the Direct Drive one in terms of...

I've changed my mind again lol. I think the 48V 10Ah Ping battery would be better. Then if I ever wanted to go faster I could add a 24V 10Ah Ping battery or even bigger Ping. The Samsung don't have smaller voltage with the same Ah so it would be harder to use them in series. This will be...

Would I be able to add one of the 25V 20Ah Battery packs from Em3ev to get more speed? How would it work because one battery would be 12.3Ah and one would be 20Ah. If the 12.3Ah went flat while I was out riding would it just use the 25V one and go slower?

I have been reading on the Em3ev website and I think the 500w direct drive kit at 335 RPM is the best option. At 25mph it's not quite what I hoped for but it is definitely fast enough. I could always add another small battery to increase maximum speed right? So, just to clarify. 500w direct...

Hi everyone. As the title says, I'm really just wanting to know if I am making the right choice with the eBike kit I am going to buy. I used the eBikes.ca simulator and that said I would get 15 miles range and a top speed of 28.7mph. My first question is, is the ebikes.ca simulator fairly...

Thank you. I just realized I made a mistake in the motor specs. The 370rpm one is a front wheel. So I'll have to get the fastest rear wheel one which is 335rpm. Do you think I will still reach 27mph with this motor?

I didn't even see the triangle batteries before, one of those would be perfect on my bike. I think I have decided on a battery and motor. I used the ebikes.ca simulator and top speed was 28.7MPH with 15 mile range. I think I have selected the most appropriate controller for the battery I have...