Hi,
The parts took some time to arrive (almost 2 months) but I finally made it, will probably have the batteries located better in the future when I'll have some time. :D
1wd Electric Onda Board
Motor: Turnigy SK3 149kv
Gear: 21T Pulley / 60T on Drive wheel
ESC: Toro X150 150A 1/8" Brushless...
Well as you know I already have 168kv 59mm diameter (http://www.hobbyking.com/hobbyking/store/__18182__Turnigy_Aerodrive_SK3_6374_168kv_Brushless_Outrunner_Motor.html)
I'm still waiting for the mechanical kits, got all the electronics and hooked them up to test them.
I think I will go for dual motor but it will be a bit expensive to buy 2nd mechanical kit..
I wanted to ask you guys if you can recommend me a good dual motor ESC that can be used up to 12S as...
Thanks, I will go 6374-192kv 1 motor for now as I don't have budget for two and I'll add another one in the future... a question - if I don't have enough space to fit the 2 motors in the rear should I do it diagonal ?
Thanks for your reply, Top Speed Should be 25km-30km (I care more about torque / power), Terrain: mixed straight roads and slight uphills maybe 10-30% steepest hills , Rider weight 80 Kg).
One more thing.. if I'm choosing the 6374-192kv Motor I can't do 2wd in the future for upgrades (on the...
Thanks guys for your answers.. I'm going crazy with the motor and ESC compatibility now..
I followed the guides here and I chose 6374-192kv Motor on Hobbyking with 150A ESC (the ESC arrived already).
I plan to use 6s Lipo .
Now Hobbyking support tells me I can't use this ESC (max 6s) with the...
I'm sorry but I didn't understand the ratio - which one should I go for good torque and acceleration (I'm more interested in torque than in top speed - if top speed will be 25 km/h it will be enough for me I think)
So is there a break button on the remote or once I pull my finger from the...
Thanks.. I already saw it on their website and sent them an email becuase I'm not sure it's comptiable with Onda Core Board... (it says it for Onda Mamooth).. Maybe it's comptiable I don't know.. waiting for reply.
Hi Everyone
I bought my Onda Board some days ago and want to make it electric.
I have read the posts here and followed these guides http://endless-sphere.com/forums/viewtopic.php?f=35&t=53506 / http://endless-sphere.com/forums/viewtopic.php?f=35&t=56375
But since it's not specific to Onda...