Recent content by TannyFordas

I got the file from someone on ES facebook, haven't tried it yet tho https://archive.org/details/mqcon-current-unlock

Hey, so I've hooked up my 100A common port Daly BMS and despite the cells reading 74v across them the BMS is only reading 61v. When a load is put across the output of the BMS this voltage drops instantly to 0. Attempting to charge the battery though the BMS does nothing, as though the charger...

Hey, i'm running what i believe is a 750C tft with my sabvoton 80A, I slammed on the regen earlier today at a full charge (calssic noob error i know) and it seems my screen was the model without any kind of surge protection as i seem to have nuked the screen (and the bms of my battery but that's...

Hey, i'm running an ant smart bms with the VBMS app and i'm getting some weird readings from temp sensors 1 and 2, which i don't believe are even connected within my battery. when the battery is under load (even just the controller on but idle) they both drop down and display a value of -30C but...

that was it, thankyou :D i have no idea what the issue was but you've solved it.

Hey, just connected my svmc7280 and connected via Bluetooth to the mqcon app and I'm getting a "lack voltage" error from the app despite the display confirming that the controller is in fact receiving about 83v. I've check the low voltage cutoff and its set to 40v so that's not the issue. The...

Hey, i'm looking to rehouse the pcb for a sabvoton in the frame i'm building and for that i need to know the dimensions of the PCB outside of it's casing. if anyone's got one laying around that they could measure i'd be very much appreciative.

I find it hard to belive that the issue lies on the motor side as I just replaced the new controller with the old one and the result is the quiet buttery smoothness I'm used to. I've spent a little while looking up comparisons between square wave and sine wave controllers and the sound of the...

with the new buzzy controller it's 0.95A, not sure with the old quiet one

okay, so i think this might be my inexperience rearing it's ugly head. is it possible that my original controller was simply a sine wave controller while both of the new controllers are square wave? would it be reasonable to assume that a bog standard ebay 1500w kit would come with a sine wave...

Current draw on the new controller is exactly the same as the previous controller, though the addition of the LCD does mean there is the option of adding/removing a "slow start" through the c5 parameter which may have been included by default on the non programmable controller. there are no self...

Hey, brand new to the forum so sorry if I've done anything wrong. Okay, so Im running a voilamart 1500w hub motor and I recently swapped the included controller for one which supports an lcd. Everything works except for the fact that the motor now makes a loud buzzing sound when it starts up...