Search results

Date Relevance Most replies

  1. D

    Evolve Carbon AT with 50km+ range

    ok got a 1.9F cap and charge it to 16-17V but with my probes i just melt through or make a weak weld so i think my probe surface area is two small. and also after every weld the cap dies but in your video yours is fine, is yours always on the charger?
  2. D

    Evolve Carbon AT with 50km+ range

    OK so LV is a no go needs to be a minimum of 12v at 2 Farads. So I may get a 3F cap at BB or go the cap bank route but, either way thanks for the help.
  3. D

    Evolve Carbon AT with 50km+ range

    was just wondering if i could get some clarification on this? i have drawn a simple diagram and was wondering if it was right. so this is how i think your welder is set-up but i still have a few questions. how do you charge the cap using a laptop charger? just plug the probes in and call it...
  4. D

    Loaded Tesseract Carbon Single VESC 6355 10S4P

    where did you find that? the cheapest i found is $4.2 a cell.
  5. D

    looking for Kegel Drive wheel Gear

    brah, brah when does your site go live?
  6. D

    Thoughts on Alien Power Pack

    from what i have seen of alien i would suggest only getting items that you can see the quality of (I.E motor mounts, pulleys and, belts) i wouldnt really touch the electronics they sell.
  7. D

    New chinese clone of STARY and INBOARD m1 board.

    found videos of the ops board https://www.youtube.com/watch?v=Mks5XQvHm74
  8. D

    anybody seriously injured from e-skateboard?

    hit a pothole at full speed
  9. D

    anybody seriously injured from e-skateboard?

    well i did do this
  10. D

    58v on VESC

    vedders site says 8v - 60v but then goes to say 3s to 12s
  11. D

    PSA: do not get ripped off by Enertion

    if you say you never got the product when in-fact its no more then 2 feet from you then yes onloop is right. if you say the product is defective yet wont do anything about it you CCC will tell you to grow up, so to save people time... GROW UP, you have been given 5 options to rectify the...
  12. D

    PSA: do not get ripped off by Enertion

    im calling bull, on enertions forum he has been nothing but helpful to the people in need concerning failures related to space cells.
  13. D

    Working on Custom Carbon Fiber Deck

    i asked on his site and he said mount (V4) should be available by the end of march/start of April. the board he says in the next few months and since he has a render all he needs to do is get someone that will make it. so ima guess may 11th - june 8th for the board. what i really want to see...
  14. D

    options for powering board with 18650 cells.

    really, really you're gonna be like that? no need to call me lazy for seeking a second opinion. look if you dont want to help at all you dont have to keep posting, theres any unsubscribe button too.
  15. D

    options for powering board with 18650 cells.

    i have a degree in electronics im not that stupid :lol: . the whole case on the inside is going to be insulated with rubber or foam and there will be foam on the cover to force the cells to stay in place.
  16. D

    options for powering board with 18650 cells.

    whoa your jumping ahead again, stop making plans for planes when we dont even have the wheel. so im going to wire 12 of these pack in to a 6s4p config so that when i draw my max im still only pulling 15A a cell (cells in question being 25R5's) on the back side of the contacts is going to be...
  17. D

    Gearbest Experience

    have you tested to make sure the batteries are legit too?
  18. D

    options for powering board with 18650 cells.

    i dont understand any of the jargon you just used, do you want me to put this in some sort of case to make sure the batteries stay in? because i was going to make an aluminium case with a sliding lid that was just touching the top of the cells so that they couldnt fall out, all sides covered in...
  19. D

    options for powering board with 18650 cells.

    Yep the cells I have now are 24 samsung 25r5 just enough for a 6s4p battery. to give everyone an idea of what im doing and thinking. im gonna take 12 of those battery sleds and wire them up in pairs with 10AWG solid copper or wet noodle so i have 6 1s4p packs. doing this because max draw of...
  20. D

    options for powering board with 18650 cells.

    22.2 and 60A or less seeing as how that's the most the vesc can pull.
  21. D

    options for powering board with 18650 cells.

    Ok I talked to a friend that vapes and he suggested that I just buy some vape 18650 sleds, there made for vapes that draw 20A so with the air running over them it should be no problem. http://www.brimstonevapeco.com/product-p/slim-dual-18650.htm this should have no problem, its made for...
  22. D

    options for powering board with 18650 cells.

    would something like this work, https://www.fasttech.com/products/1009/10002233/1290005 ot is there just nothing on the market for this much current?
  23. D

    options for powering board with 18650 cells.

    so i want to make a 18650 battery pack for my board because lipo pouches are evil, EVIL!! so far i have two plans plan 1: make a battery pack with or with out a bms and run that charging with a hobby charger if i go bms-less or laptop charger if i get a bms. plan 2: buy 6 of these...
  24. D

    On/Off switch with momentary switch antispark

    i dont think that switch will work, it says its only a 6Amp switch. your esc can pull 120Amps.
  25. D

    Landyachtz TopSpeed 90mm 10S4P DualRearDrive

    Ok so just TB'S ON/OFF and a laptop charger balance plugs aren't plugged in or used? That's pretty sweet.
Back
Top