creativepart
1 mW
- Joined
- Jun 20, 2020
- Messages
- 14
I have a Blix Vika + ebike. It has a 48v 14 aH battery and a 500w rear hub motor. The pedal assist goes from 1 to 5 but the motor stops assisting at 18.1 MPH. Is there any info out there on getting into the advanced settings mode on the display to bump this up a bit.
I'd love to get it to 25 mph but would settle for just the advertised 20 mph.
Shengyi Motor
Cadence Sensing Pedal Assist, Trigger Throttle (12 Magnet Cedence Sensor)
Here's what the display looks like:
I'd love to get it to 25 mph but would settle for just the advertised 20 mph.
Shengyi Motor
Cadence Sensing Pedal Assist, Trigger Throttle (12 Magnet Cedence Sensor)
Here's what the display looks like: