mjp8081
100 W
Not sure if anyone has had this problem--when I hit about 10mph+ my board starts making a fairly loud wailing sound, getting louder with more speed. It sounds like resonance going through aluminum plate, if that makes sense--I don't think its the motors per se. There are a couple things that are suspect:
My chains might be too tight, and creating a resonance with the aluminum wheel sprockets or my aluminum plate motor mount.
If it's the aluminum sprockets, I may need to get steel.
The online store I got my chains from has a low and high grade #25 chain--I got the cheaper "lower" grade
I may try bolting the plate(s) down tighter, maybe adding a thin layer of rubber between bolted aluminum parts, maybe even drilling a pattern of holes to interrupt the vibration and reduce weight.
I will post back when I solve it.
My chains might be too tight, and creating a resonance with the aluminum wheel sprockets or my aluminum plate motor mount.
If it's the aluminum sprockets, I may need to get steel.
The online store I got my chains from has a low and high grade #25 chain--I got the cheaper "lower" grade
I may try bolting the plate(s) down tighter, maybe adding a thin layer of rubber between bolted aluminum parts, maybe even drilling a pattern of holes to interrupt the vibration and reduce weight.
I will post back when I solve it.