Can anyone help me with cross shape mounting plate

[napmotec]

I have ordered Turnigy Aerodrive SK3 - 6354-215kv Brushless Outrunner Motor here is link : http://www.hobbyking.com/hobbyking/store/__18179__Turnigy_Aerodrive_SK3_6354_215kv_Brushless_Outrunner_Motor.html

But the motor is supplied with a cross shape mounting plate. I need to know about the hole centers dimension and size of holes (see my attach picture)

Thanks a lot.

I also asked to knowledge center of Hobbyking but they cant provide my answer. :?

 

[speedmd]

I would not rely on a print if the parts are in front of you. You will get much closer to actual and simple to measure with good accuracy and repeat-ability. With good calipers and some patience, measure outside to outside of opposing holes, follow by inside to inside. Average the two measurements to give you the bolt circle diameters.

 

[napmotec]

The motor is in the shipment process. There will be here quite more days but I have to prepare my motor plate as soon as I can.

 

[spinningmagnets]

If you could describe what you plan to build, perhaps I could help you.

http://endless-sphere.com/forums/viewtopic.php?f=28&t=18517&p=372540#p372540

 

[crossbreak]

this might help