Hello to all Endless Sphere users. I have been reading various threads on the forums for a long time and thank you for your knowledge. Thanks to you I was able to install the mid engine in my bike.
1) However, I have a problem with the Wato charger.
Currently, the charger gives a maximum of 54.2 volts. I would like to increase the charging voltage to 54.6V. BMS starts to balance me from 54.4V. There are two potentiometers inside VR1 and VR3 (on attachments). Does anyone know which one is responsible for changing the voltage? I wouldn't want to over-regulate something.
2) The second question concerns the idea of lowering the voltage to 4.1V per cell.
To achieve this I thought about making a box with two rectifier diodes connected in series (voltage drop by 2 x 0.7V= 1.4V). 5A diodes with soldered heat sinks.
Usually I would charge the packet to 4.1V/cells.
Every few charges I would charge 4.2V/cells to balance the battery.
Will such a solution work properly?
Thanks for your help, Tom.
1) However, I have a problem with the Wato charger.
Currently, the charger gives a maximum of 54.2 volts. I would like to increase the charging voltage to 54.6V. BMS starts to balance me from 54.4V. There are two potentiometers inside VR1 and VR3 (on attachments). Does anyone know which one is responsible for changing the voltage? I wouldn't want to over-regulate something.
2) The second question concerns the idea of lowering the voltage to 4.1V per cell.
To achieve this I thought about making a box with two rectifier diodes connected in series (voltage drop by 2 x 0.7V= 1.4V). 5A diodes with soldered heat sinks.
Usually I would charge the packet to 4.1V/cells.
Every few charges I would charge 4.2V/cells to balance the battery.
Will such a solution work properly?
Thanks for your help, Tom.