Controller, BMS Id?

[Glenn_M]

Hi All,
Ebike noob here currently in process of transforming rack mount 4stroke ICE bike to a 1000W rear hub drive purchased from a forum member (who had himself got it from someone else). Goes very well but not much is known about the components.

Motor is 1000W, batts are 48V 20Ah li-ion and that's about all I know really. Now as a typical bloke, when you get something new you pull it apart to see what's inside

Pics below are of the controller and BMS attached to the batt pack. Any information regarding identification etc of either would be appreciated.

Cheers,

Glenn

 

[dogman dan]

Looks like a Cammy cc or V power HK battery. Hub looks like a golden motor, or very similar type from another factory.

The controller looks pretty high power for both the motor and the battery to me, probobally 36-72v operating range. It's the amperage of it that concerns me, if it's over 30 amps, it may be putting a pretty good strain on the battery.

 

[Glenn_M]

Yep dogman, motor is a Golden HBS48V 1000W.

Got a Turnigy Watt Meter on the way so will hook up to see what discharge like.

Cheers,
Glenn