controller KT36/48 KT36/48 SVPRL-TS02C suitable for open source firmware ?

[moriamoria]

hello,

can you help me to find reference to buy kt controler that i want tu use with osec open source ?

ebay, aliexpress or other.

I miss the point by bying a square model : kt48ZWSRKT6SJT02L . i failed to use it after flashing GitHub - stancecoke/BMSBattery_S_controllers_firmware: OSEC Open Source E-Bike Controller in a Windows toolchain for a STM8

I even try to add a hall current sensor, but i think I kill the board!

I have also by hc-05 bluetooth (flashing works, bluetooth works, lcd works but when I try on bike, i smeel burn. and controler stop working..)

i have check the motor and hall sensor, all seems right

thanks for your help

regards

 

[moriamoria]

Hello from Paris,

Can anyone tell me if I can install stancecoke/BMSBattery_S_controllers_firmware on this controller ?

Also can you send me some reference for buying a

• EBiCS/
• EBiCS_Firmware

• About​

  Free FOC firmware for Lishui E-Bike-Controllers

Last question, is it better to buy a KT controller or a Lishui controller ?

Regards to all and thanks for your help

 

[stancecoke]

Can anyone tell me if I can install stancecoke/BMSBattery_S_controllers_firmware on this controller ?

Yes, that should work, but I don't recomment that, as the firmware is no longer maintained.

Last question, is it better to buy a KT controller or a Lishui controller ?

I recomment the Lishui hardware, as it is much better than the Kunteng.
On the EBiCS wiki are some links to distributors:

Where to buy a suitable controller

Free FOC firmware for Lishui E-Bike-Controllers. Contribute to EBiCS/EBiCS_Firmware development by creating an account on GitHub.

github.com

regards
stancecoke

 

[moriamoria]

Hello,

Many thanks for your answer, I will go for a Lishiu hardware.

But I have a pas sensor, not a torque.

Can I manage with this Lishui hardware ?

Regards

 

[stancecoke]

Can I manage with this Lishui hardware ?

Yes of course, simple power levels are the default setting, if you don't activate the torque sensor mode.

regards
stancecoke