DanGT86
100 kW
crossbreak said:crossbreak said:thx, i'll try it that way. And thicken the wall, ATM it is .8mm which might be too athletic i agree. i'll try making it >1mm by shifting the BCD by .5mm (bolt circle diameter)
now it's 7pcs M5 bolts instead of 6, resulting in much thicker walls. Thanks for all of your input, this really helps to improve it before i built the "final" prototype next week
Sorry to revisit an old issue but If you need to run the bolt holes close to the bearings you could press in a dummy bearing into the bore to be left in place during the drilling of the holes. This way the material cant deflect into the bearing bore.
Cool motor!