ebikestuff.eu
100 mW
The most readable and convenient display existing on the market. With OSF v20.1C.4 uploaded under tsdz2, which gives you the ability to set all parameters from the display. Built-in USB port for charging the phone. From the display we can read: speed, power put in by the user, power given out by the motor, battery voltage, cadence, motor temperature (if a temp sensor is installed), kilometers traveled, maximum and average speeds from the section, time and much more. You can also have the information displayed in graphs, set thresholds, etc. (NOTE: you also need to upload OSF in the motor controller, we also provide such a service).
The display uses a 5-pin female hermetic HIGO connector for communication (to work properly with the 8-pin TSDZ2 controller, a suitable Conversion 1T4 Wire Harness for TSDZ2 is required)
On the subject of OSF: from the display we can easily and clearly change:
NOTE: OSF is adjusted according to our own experience.
Price - €97.99 / piece
In case of any questions do not hesitate to ask.
More information and products on our store: ebikestuff.eu
We are sending all over the world.
The display uses a 5-pin female hermetic HIGO connector for communication (to work properly with the 8-pin TSDZ2 controller, a suitable Conversion 1T4 Wire Harness for TSDZ2 is required)
On the subject of OSF: from the display we can easily and clearly change:
- type of assist (hybrid, eMTB, power, torque, cadence)
- the number of assists (0-9) and to each assist assign our own most corresponding values,
- rendered maximum power,
- calibrate the strain gauge,
- calibrate the voltage,
- set off road/street mode,
- assign keyboard shortcuts (e.g. to quickly change from off road to street mode),
- virtual maneuver, and much more.
NOTE: OSF is adjusted according to our own experience.
Price - €97.99 / piece
In case of any questions do not hesitate to ask.
More information and products on our store: ebikestuff.eu
We are sending all over the world.
Attachments
Last edited:
