madteknician
1 µW
Hi,
I bought a 36 volt 60/120 controller with a s866 LCD connected the hub motor and the PAS sensor and I get an e 07 error which means hub motor is suspect. All 3 hall sensors test OK. The 3 phase wires are OK as when I plug in the self learning wire the motor runs smoothly with all speeds on PAS.
Hub motor tests OK
Hall sensors are OK
PAS 12 magnet tests OK
I am an electrician and had no problem repairing other ebikes ?
I am stumped?
Any ideas out there?
Regards
Rob {Madteknician)
I bought a 36 volt 60/120 controller with a s866 LCD connected the hub motor and the PAS sensor and I get an e 07 error which means hub motor is suspect. All 3 hall sensors test OK. The 3 phase wires are OK as when I plug in the self learning wire the motor runs smoothly with all speeds on PAS.
Hub motor tests OK
Hall sensors are OK
PAS 12 magnet tests OK
I am an electrician and had no problem repairing other ebikes ?
I am stumped?
Any ideas out there?
Regards
Rob {Madteknician)