Ecoreco M5 forkplay

[Galcohen24]

Hey, I have a scooter that has the same frame as the Ecoreco M5 and lately I have had a lot of forkplay (the handle moves forward and backward a little bit).
I tried tightening every screw I thought might cause it but nothing changed.

The only screw I can't tighten is the one inside the fork, how do I access it?
(There is a screw at the bottom that can't be tightened and so probably there is a nut inside the fork but I don't see how to disassemble it).
Thanks for the help!

 

[AussieRider]

Hi Galcohen.
The play is most likely from wear on the folding lock pin or in the latch hook. If the head bearings are loose, you'll have to remove the front wheel & mudguard to get at the adjustment. Hope this helps.

AussieRider