Hi
I have an electric scooter/patinete that's 900w. Lately, it's acting strange. Basically, when the scooter is off the ground ( wheel in the air ) then it works fine when it's on the ground, it hardly spins if at all.
My batteries voltage seem good. 13.2volt.
So I cut the two power wires to test voltage and it shows it gives 38Volts to the motor when is on the air but as soon as the wheel touches the ground it stops and the volt is now just 1.5volt and I can hear the motor but it doesn't spin.
Shouldn't the controller give full 36volt when the wheel is on the ground ?
Bad controller ?
Many thanks,
Mer
I have an electric scooter/patinete that's 900w. Lately, it's acting strange. Basically, when the scooter is off the ground ( wheel in the air ) then it works fine when it's on the ground, it hardly spins if at all.
My batteries voltage seem good. 13.2volt.
So I cut the two power wires to test voltage and it shows it gives 38Volts to the motor when is on the air but as soon as the wheel touches the ground it stops and the volt is now just 1.5volt and I can hear the motor but it doesn't spin.
Shouldn't the controller give full 36volt when the wheel is on the ground ?
Bad controller ?
Many thanks,
Mer