mchlpeel
100 W
Just seen this, looks pretty cool
http://em3ev.com/store/index.php?route=product/product&product_id=209
http://em3ev.com/store/index.php?route=product/product&product_id=209
EM3EV selling Full sus frames
- Thread starter mchlpeel
- Start date
nutnspecial
10 MW
Very cool, I will be interested to compare this frame!
Here's another that I just purchased myself. Not only the price is great, but the geometry of the high swingarm pivot is hopefully friendly to a mid drive. eastgem.net
http://endless-sphere.com/forums/viewtopic.php?f=3&t=70616&p=1072350#p1072350
I'll let everyone know how I make out with the product.
Here's another that I just purchased myself. Not only the price is great, but the geometry of the high swingarm pivot is hopefully friendly to a mid drive. eastgem.net
http://endless-sphere.com/forums/viewtopic.php?f=3&t=70616&p=1072350#p1072350
I'll let everyone know how I make out with the product.
anoNY42
10 W
Nutspecial, I would love to hear how you manage to...make out... with your full suspension frame...
nutnspecial
10 MW
I . . . . certainly . . . . will post 
!
This em3 frame is really exciting too though, and they are one of the best ebike kit sellers imo.
I would love to have comparisons of Raptor, Phasor, Flux, Vector, Em3, Eastgem, and the rest of this style frames
It would be great to have:
-Suggested and acceptable range of: Front susp length (steerer to axle center), rear susp length (eye to eye), wheelsize
-Suggested and acheivable (based on above): Rake, wheelbase, bb height, bar and seat height and distance between.
A fairly simple drawing of each product would greatly aid in the varialble geometry and measurents.
Then I'd want to know:
-Price
-Dropout (width and type)
-Swingarm pivot type
-Swingarm length
-Metal and tensile psi
-Weight
I might be a slightly demanding consumer, but too much?
Full disclosure, I think Raptor offers a ton of info on their frames!
! This em3 frame is really exciting too though, and they are one of the best ebike kit sellers imo.
I would love to have comparisons of Raptor, Phasor, Flux, Vector, Em3, Eastgem, and the rest of this style frames
It would be great to have:
-Suggested and acceptable range of: Front susp length (steerer to axle center), rear susp length (eye to eye), wheelsize
-Suggested and acheivable (based on above): Rake, wheelbase, bb height, bar and seat height and distance between.
A fairly simple drawing of each product would greatly aid in the varialble geometry and measurents.
Then I'd want to know:
-Price
-Dropout (width and type)
-Swingarm pivot type
-Swingarm length
-Metal and tensile psi
-Weight
I might be a slightly demanding consumer, but too much?
Full disclosure, I think Raptor offers a ton of info on their frames!
ohzee
100 kW
nutspecial said:I . . . . certainly . . . . will post
Full disclosure, I think Raptor offers a ton of info on their frames!
I agree and one of the primary reasons I just purchased one. The easier you make it for people to use your product the better chance you have of selling it.
Especially with all the options available.
I noticed you left out the Phasor and figure you did that on purpose , but I could be wrong. Anyway I love my phasor and it's a very well built frame. I just
wish David would hire someone to put some updated data on his web page. It seems to me like he does not want to sell more bikes. /off soapbox
Anyway off topic sorry.
It's great to see Paul offering this option and by his reputation alone I would assume it is well built.
Look forward to the reviews.
nutnspecial
10 MW
Oops! Corrected. I'm just getting into this style frame and don't know all the types.
speedpower99
10 mW
Is that the same one on alibaba? more like a clone vector frame.
rider95
1 kW
Nice does it come with forks n shock??? not for that kinda of money that's pretty cheap price looks good I can see a new build for me coming if I could get a motor cycle style seat on it??
dogman dan
1 PW
Very interesting. At $500 I would guess you add your own everything, starting with front and rear shocks, and likely bottom bracket too.
Build it out nice with new parts, still going to be $2000 all in, as would any really good bike. But most of those DH bikes suck at carrying a battery or bolting on a Cromotor. this one will do both well!
$500 cheap, if you have a DH bike already! Sell off that stripped frame and break even. 8)
Build it out nice with new parts, still going to be $2000 all in, as would any really good bike. But most of those DH bikes suck at carrying a battery or bolting on a Cromotor. this one will do both well!
$500 cheap, if you have a DH bike already! Sell off that stripped frame and break even. 8)
rider95
1 kW
So Paul is building a battery pack for this frame ?
He said he'll be supply batteries eventually. Comes with a BB. Fatbike width.
I've ordered a frame and borrowed Brake's spot welder for building up a pack into it. Planning on putting a 60-tooth and ~30 tooth twin rings on it with the smallest rear freewheel I can fit, 16t on my cro. No front derailleur, small gear will just be for emergencies. I'll be using Arduino to integrate throttle AND torque input from strain gauges on a chain idler into a single, responsive combined signal for the Max-E. And I'll be stuffing my Geogram One in there too. I'm planning on putting a Rockshox Reba Race on the front but might start with just a cheap rear coilover in the rear. I might weld up a steel rack that I can bolt/unbolt off the rear.
It'll be a commuter and light expedition XC offroader.
I have 440x 18650's to load it up with, nearly 5kwh.... lets see how many fit!!
I'd like to build a tilting full-faired delta velo but don't have the time with my grad program so this will fill my local transport needs for now, plus some unwinding off road =)
I'll report back when it arrives. Should get one of the first.
EDIT: Confirmation, shipped out this morning. Eagerly anticipating it's arrival!
I've ordered a frame and borrowed Brake's spot welder for building up a pack into it. Planning on putting a 60-tooth and ~30 tooth twin rings on it with the smallest rear freewheel I can fit, 16t on my cro. No front derailleur, small gear will just be for emergencies. I'll be using Arduino to integrate throttle AND torque input from strain gauges on a chain idler into a single, responsive combined signal for the Max-E. And I'll be stuffing my Geogram One in there too. I'm planning on putting a Rockshox Reba Race on the front but might start with just a cheap rear coilover in the rear. I might weld up a steel rack that I can bolt/unbolt off the rear.
It'll be a commuter and light expedition XC offroader.
I have 440x 18650's to load it up with, nearly 5kwh.... lets see how many fit!!
I'd like to build a tilting full-faired delta velo but don't have the time with my grad program so this will fill my local transport needs for now, plus some unwinding off road =)
I'll report back when it arrives. Should get one of the first.
EDIT: Confirmation, shipped out this morning. Eagerly anticipating it's arrival!
Similar threads
