Hallo, to all, i see some people there use Sabvoton controller,

[Litium]

Hallo, to all, i see some people there use Sabvoton controller, i have Sabvoton 48V80A SSC version, (Square)
I start to become crazy with regen, i set slide brake in software, electric brake ecc...
But regen dont work, wich wire i have short for start ebrake? I suppose "high brake" on the 5V+ Right?

And you can explain the difference from "General brake" and electric brake?
With Kelly all works right, and im experienced user...but really this time i dont understand how i have to make works this regen

Thank Alot to all

 

[Litium]

this is my setup, i use Cromotor
and i have this diagram for connection
I try to connect Purple wire-High brake to 5+V , and i see on the status bar in the real time sowtware appear ELEctronic brake, like the brake start, but the motor only stop to rotate, withouth regen, like stop rotate when you release throttle normally
And wich is the difference from "General brake" and electric brake?
Another strange thing is, my controller is 80A, so i have to put 80 on rated current and max current, but with this settings controller give me error of overcurrent at startup
The only settings works is this 150A, but is strange because my controller is max 80A

 

[BoomerChomsi]

Thanks for pictures, what feature is decelerate time?

 

[Litium]

Is the rate of throttle slow dow, the ramp down when you release the throttle

 

[BoomerChomsi]

Thanks mate! 8)

 

[cycborg]

Alan B has done a lot of work with regen on his Sabvoton, and he posts updates to his build thread. I suggest you read through that and see if it addresses your issues.

 

[Litium]

I read all post of Alan, thanks, but maybe my controller have some problem...
I do all in software and i connect all right wire, but regen seems dont work, if i can, today i test on the road and look whats happen

 

[sspike]

Hello Litium,
I have the same problem with e-brake and slide recharge.
Did you find a solution?
Thanks in advance

 

[dnmun]

was this all of the posts you did here about your controller before you posted up the other thread trashing the seller?

why did you send the controller back to the seller? did he ask you to send it back? then never took possession?

i just did not see anywhere that you mentioned your discussions with him in this thread and this appears to be your only thread.

did this controller never work for you or was it just a problem to program it that you could not master? did it work as expected except for your not having regen kick in where you expected?

did you ask alan what he thought the problem was or find any other users of this controller to ask how they programmed it?

 

[thegreatdane6]

Hello,

I'm having the same problem as you Litium, did you find any solution?

Thanks