Help identifying wires on controller model kt48zwsl-lcd

[Ifixstuff]

I recently had to purchace a new controller for my bike, some wires got crossed and i released all of the magic smoke in the controller. I ordered the closest replacement i could find for it"
http://www.leafbike.com/products/brushless-motor-controller/48v-lcd-motor-controller/48v-1000-1500w-bike-motor-controller-700.html
model number is kt48zwsl-lcd

Most of the wires ive been able to identify but there is one plug that i do not know how to wire in. I am assuming it is the plug for the regen/e-brake/reverse but i am not sure of the wiring. It is a four wire plug, green blue yellow black. I am assuming black is ground and jumping black to the other wires will activate these features, and i will experiment hopefully later on tonight.

Any insight will be appreciated

 

[dnmun]

did you ask the seller for a diagram explaining the wires?

 

[Ifixstuff]

Yes I have, but I have yet to receive a reply. It isn't exactly a deal breaker for me, as I didn't have any of those on my bike already, but if I can put them on then I would like to.
On that page it shows it hooked up to a controller with a red and green button on it. They sell the controller, but it has 7 wires not 4.

 

[dgk02]

There is a diagram down on the right of the page that shows the controller hooked up to various thingies. That's a big help.

 

[Ifixstuff]

@dgk02 Yeah that's the diagram I was referring to, but the controller that they show in that picture; which they do sell, has seven wires instead of only four.
http://www.leafbike.com/products/electric-bike-parts/control-switch/sw-002-950.html

 

[Ifixstuff]

Well I got a response, albeit a completely useless one. But I did manage to find what wires did what and I will post them here for future reference if anyone else will need them.
Black is a common ground.
Short black to yellow to activate reverse, then use the throttle.
Short black to green while holding the throttle at a desired speed to activate cruise.
Short black to blue while braking to activate regenerative braking.

Hope someone finds this useful!

 

[dnmun]

change your title so the google bot will have the name of the bike and controller in the title if someone is searching for it. then someone may find it later.