Honda Clarity Battery
- Thread starter eCRX
- Start date
Quinc
1 kW
- Joined
- Apr 18, 2016
- Messages
- 341
im playing with these: B-MAX Cells! Perfect for Car Audio Battery! - 12s NMC Module 44.4vDC 200A Continuous, 400A Burst - JAG35.com Jehu Garcia DIY Powerwalls Lithium Ion Batteries EV eBike eScooter Emergency Solar Off-grid
www.batemo.de
Honda Clarity
Get all you need of the battery cell Honda Clarity. A high-precision battery model, measurement data and a detailed cell report.
www.batemo.de
GrantMorgan
10 µW
What’re your thoughts on them so far?im playing with these: B-MAX Cells! Perfect for Car Audio Battery! - 12s NMC Module 44.4vDC 200A Continuous, 400A Burst - JAG35.com Jehu Garcia DIY Powerwalls Lithium Ion Batteries EV eBike eScooter Emergency Solar Off-grid
Honda Clarity
Get all you need of the battery cell Honda Clarity. A high-precision battery model, measurement data and a detailed cell report.
Quinc
1 kW
- Joined
- Apr 18, 2016
- Messages
- 341
So far so good. But my dang electric motor is having issues so haven't been able to test it out.
ScrapRider
100 µW
- Joined
- Aug 28, 2022
- Messages
- 9
I got 2 and run in series for 24s on a mini 2k 10” hub motor bike I built. More of a mini motorcycle then a bike. So the cells are good, I have a Fardriver 84450 controller that pulls 180 amps out of the pack and I get maybe 2 volt sag, if that much. Virtually no sag all the way from full down to around 20 percent battery is about the lowest I have gone. Capacity is as claimed as far as I can tell. Running a 150 amp jK BMS with it and it stays perfectly balanced and not had any issues. The only downside I can see is they are heavy for the capacity they have. But I needed a cheap battery that could output at least 180 amps without to much stress and for the price of 58$ each pack x2 you can’t do much better. Threaded lugs make connections easy, just be careful with the balance leads. I’m not sure his wire pin out is correct, or I did something wrong. Either way just check and double check.
