How to open Rear hub motor without screws?

[gogreenpower]

Hi Guys,

Any ideas on how to open up this motor? I don't have anything that fits those 4 cut outs around the freewheel threads, if that's it, then hammer and punch is my only option.

 

[lnanek]

Gear puller?

 

[AGS]

A hub puller won’t work. It’s a Dapu motor and the cover needs to be unscrewed. Here is a thread showing how to remove the cover:

Dapu Motor Disassembly (Thread-on / Screw-on sidecover)

This is for a Dapu front geared hubmotor on a Pedego latch 2016, but it should work for any hubmotor whose sidecover as a whole unscrews (is not bolted on), and has the same ~70mm diameter spacing of the four tool notches on the non-brake side. I was going to make a tool, but Cvin found an...

endless-sphere.com

 

[gogreenpower]

A hub puller won’t work. It’s a Dapu motor and the cover needs to be unscrewed. Here is a thread showing how to remove the cover:

Dapu Motor Disassembly (Thread-on / Screw-on sidecover)

This is for a Dapu front geared hubmotor on a Pedego latch 2016, but it should work for any hubmotor whose sidecover as a whole unscrews (is not bolted on), and has the same ~70mm diameter spacing of the four tool notches on the non-brake side. I was going to make a tool, but Cvin found an...

endless-sphere.com

Thanks, working on a tool now