So here it is... just a few points to note, even a standard 1600mm rear brake line is too short, this frame is surprisingly long and should be good for stability. I will have to order 3000mm and cut to length to get it routed through the frame so it won't be visible. The idea is to hide all and every cable. Also those carbon covers were "samples" HPC sent me as they were at the time trying to source a manufacturer that could provide the quality finish they wanted. You can't see in the pics, but there are some areas that have fibers showing. Chris, if you're reading this, please send me the good glossy ones if you have them now (flat will do). Also I'm planning some intakes on the side of the covers for ram air cooling. I'll have the motor thermal and amp protected and see how it runs, but even a fan cooled option under the frame where you can kind of see that opening is an option. Next step is to get some chainrings and start the motor connection.