Impulse purchase can anyone identify?

[xsynergist]

If you have only four wires to the throttle connector and it has LEDs that work and a switch, there can't be an ignition wire there. You would need five wires for that. So, what does the switch do? I have seen them wired internally to switch off just the throttle, leaving the controller switched on.

When you connect everything together to test it, if it doesn't work, check that there's 5v between the red and black throttle wires. If there isn't, the controller is switched off, so you'd need to look at the yellow and white wires..

I was confused there are 6 wires on the throttle connector...

 

[wesnewell]

1 Common ground
2 +5V
3 throttle sense wire
4 power led's
5-6 ignition switch for controller.

 

[xsynergist]

Thanks!

Next question - Cycle Analyst. Is it possible/reasonable to hook one up to this setup?

 

[xsynergist]

Fat Tire bike build - posted. I put some pics up. Thx guys it is up and running!!