Micro-Tech
10 µW
Good morning.
I would like to ask for help.
Namely, I wanted to upgrade my LMX 64 Silixcon SCLynx. However, I chose the wrong file to update.
I chose 0. That is testing:VECTOR_Lynx_lmx
I also uploaded a backup which was done automatically.
Unfortunately, there was no response after the update. The display starts but the bike does not respond to the manete and pedals. I had a photo of the info about the driver and the software and it turned out that I had the Vectron_Lynx_devel version of the software
After flashing back the Vector_Lynx_devel version still does not work.
Also after uploading the backup.
I noticed that in the map options the kphlimit parameter was previously 45, now it is 0 and cannot be changed. The same in mapcnt (was 6) now 0 and pwrlimit (was 2500) now 0. Variables in mpach from 1-5 change and save normally. They don't want to sign up.
Until the update, I changed the option in maps 1-5 and there was no problem.
Please help. The season is in full swing and I killed my toy
I would like to ask for help.
Namely, I wanted to upgrade my LMX 64 Silixcon SCLynx. However, I chose the wrong file to update.
I chose 0. That is testing:VECTOR_Lynx_lmx
I also uploaded a backup which was done automatically.
Unfortunately, there was no response after the update. The display starts but the bike does not respond to the manete and pedals. I had a photo of the info about the driver and the software and it turned out that I had the Vectron_Lynx_devel version of the software
After flashing back the Vector_Lynx_devel version still does not work.
Also after uploading the backup.
I noticed that in the map options the kphlimit parameter was previously 45, now it is 0 and cannot be changed. The same in mapcnt (was 6) now 0 and pwrlimit (was 2500) now 0. Variables in mpach from 1-5 change and save normally. They don't want to sign up.
Until the update, I changed the option in maps 1-5 and there was no problem.
Please help. The season is in full swing and I killed my toy