Hi everyone,
I locked myself out of my Bafang DP C18.C1.0 display due to a forgotten PIN code.
I opened the display and soldered wires to the SWD pads (3.3V, GND, SWCLK, SWDIO) to reset the PIN via ST-Link V2 and STM32CubeProgrammer. Unfortunately, my MCU has Readout Protection active (RDP Level 1), which throws a Data read failed error upon connecting.
As you know, switching RDP from Level 1 to Level 0 triggers a full Mass Erase of the STM32 Flash memory. To restore the display after removing RDP, I need a clean binary file.
Does anyone happen to have a full un-protected STM32 Flash memory dump (.bin / .hex) from a working DP C18.C1.0 (CAN-bus) display that they would be willing to share?
Thanks in advance for your help!
I locked myself out of my Bafang DP C18.C1.0 display due to a forgotten PIN code.
I opened the display and soldered wires to the SWD pads (3.3V, GND, SWCLK, SWDIO) to reset the PIN via ST-Link V2 and STM32CubeProgrammer. Unfortunately, my MCU has Readout Protection active (RDP Level 1), which throws a Data read failed error upon connecting.
As you know, switching RDP from Level 1 to Level 0 triggers a full Mass Erase of the STM32 Flash memory. To restore the display after removing RDP, I need a clean binary file.
Does anyone happen to have a full un-protected STM32 Flash memory dump (.bin / .hex) from a working DP C18.C1.0 (CAN-bus) display that they would be willing to share?
Thanks in advance for your help!
