Hello,
Finaly im making 6x battery packs 6s10p for ANR26650m1b. (3.3v, 2.5ah)
Each pack will then be 19.8v and 25ah.
I need to know where and what Components i need to buy to put each pack together. These packs can burst over 750amps and in totalt 120v together in series. So i believe i need to use 50mm2 cables. Im also going to put them in both series and parallel if i want to, so im therefor having 2x bulletsconnector on each positive and negative cable.
And how should i Connect these batteries, does someone have a schema or Picture?
Ok to sum it up
- Where can i buy the copper/tin to Connect the batteries together, and how can this be done easily? Must be thick and wide enough to fir the battery Connector under and also whitstand 750amp for 10sec.
- Can i use these to Connect the batteries together?
https://www.banggood.com/26650-Radiating-Shell-ABS-Plastic-Holder-Battery-Pack-Spacer-p-1008127.html?rmmds=buy&cur_warehouse=CN
- If i can use above battery holder, how can i then wrap the pack together and how can i easily Connect each battery With the copper/tin
- I dont want BMS, i want some sort of LIPO alarm to tell me if one of the packs are, where can i buy alarm that can go lower volt than a LIPO alarm?
Any other tip?
Thanks alot for the help!
Best Regards
Thomas
Finaly im making 6x battery packs 6s10p for ANR26650m1b. (3.3v, 2.5ah)
Each pack will then be 19.8v and 25ah.
I need to know where and what Components i need to buy to put each pack together. These packs can burst over 750amps and in totalt 120v together in series. So i believe i need to use 50mm2 cables. Im also going to put them in both series and parallel if i want to, so im therefor having 2x bulletsconnector on each positive and negative cable.
And how should i Connect these batteries, does someone have a schema or Picture?
Ok to sum it up
- Where can i buy the copper/tin to Connect the batteries together, and how can this be done easily? Must be thick and wide enough to fir the battery Connector under and also whitstand 750amp for 10sec.
- Can i use these to Connect the batteries together?
https://www.banggood.com/26650-Radiating-Shell-ABS-Plastic-Holder-Battery-Pack-Spacer-p-1008127.html?rmmds=buy&cur_warehouse=CN
- If i can use above battery holder, how can i then wrap the pack together and how can i easily Connect each battery With the copper/tin
- I dont want BMS, i want some sort of LIPO alarm to tell me if one of the packs are, where can i buy alarm that can go lower volt than a LIPO alarm?
Any other tip?
Thanks alot for the help!
Best Regards
Thomas