Sparrowhawk300
10 mW
- Joined
- Jul 20, 2016
- Messages
- 27
Haven't gotten excited in a while about building something like this...since my days of RC . Thank You Nowind, Whiteponey,Esk8, for your contribution and many more that share their findings and innovations!
I wanted a trampa holypro deck 35(of course is the slickest deck arround), but found a deal for a Mbs Comp 95 and couldn't pass it.
So the build will use:
Mbs Matrix Pro Trucks
TorqueBoards 6374 230 kv Motors( only one for now-will eventually be a dualdrive)
Vesc-getting it from torqueboards, should be here by the first week of August.
Diamond Scrub 200 mm wheels.( I got them on ebay-they come with 10 mm bearings, 12 mm bearings were adapted to fit the Mbs Trucks (waiting for trampa shims and washers-the only ones i could find for 12 mm trucks).
60t wheel sprocket (fixing my Cnc Linux Pc right now, so i can modify the sprocket to fit the Scrub Hub Holes) , hope i can mill thru this steel!
This thing is getting pretty heavy I am only 150 Lb hope I can handle it
11 T or 12 T for now on the motor.
I do have some batteries 6200 4s , could make a 8s or 12 s for 12400 or 6200 mah, but good enough to get me started with the vesc when it gets here.
Motor mounts are 6061 3/8" aluminum thick , they fit perfect and secure themselfs with grubscrew from two angles, esk8fr really made a beautifull one , check his instagram profile!
https://www.instagram.com/p/BIDtNCDjuAO/
Limited at uploading pictures, I will keep trying to update the build with pictures. Thanks Guys!
I wanted a trampa holypro deck 35(of course is the slickest deck arround), but found a deal for a Mbs Comp 95 and couldn't pass it.
So the build will use:
Mbs Matrix Pro Trucks
TorqueBoards 6374 230 kv Motors( only one for now-will eventually be a dualdrive)
Vesc-getting it from torqueboards, should be here by the first week of August.
Diamond Scrub 200 mm wheels.( I got them on ebay-they come with 10 mm bearings, 12 mm bearings were adapted to fit the Mbs Trucks (waiting for trampa shims and washers-the only ones i could find for 12 mm trucks).
60t wheel sprocket (fixing my Cnc Linux Pc right now, so i can modify the sprocket to fit the Scrub Hub Holes) , hope i can mill thru this steel!
This thing is getting pretty heavy I am only 150 Lb hope I can handle it
11 T or 12 T for now on the motor.
I do have some batteries 6200 4s , could make a 8s or 12 s for 12400 or 6200 mah, but good enough to get me started with the vesc when it gets here.
Motor mounts are 6061 3/8" aluminum thick , they fit perfect and secure themselfs with grubscrew from two angles, esk8fr really made a beautifull one , check his instagram profile!
https://www.instagram.com/p/BIDtNCDjuAO/
Limited at uploading pictures, I will keep trying to update the build with pictures. Thanks Guys!