purpledrank
1 µW
Hey y'all im building a Frankenstein of a bike with random parts I've got and on this one in 0 particular I'm using what I believe is a natco 36 volt controller I've attached pictures I've already tried wiring what seems like five or six other controllers and for some reason because none of the parts were original to each other I'm struggling to get the wiring correct however this controller is seeming to be complete so nothing has been spiced yet on the controller itself so before I go to cutting wires I was wondering if anyone could help me with the exact wiring layout what each color wires for and what their destination is I'm going to be using a g51 display regular twist throttle nothing fancy and a standard pedal assist cadence sensor 36 volt motor 350 w I believe mxus motor also if you could let me know which wires I don't have to have connected to make this thing run my lights are going to be wired separately directly to a battery on a switch with fuse I am however going to be running at least two batteries in parallel if I don't have any issues with overheating I'm going to attempt to run three however again I have absolutely no idea what I'm doing truly and he advice is greatly appreciated thanks in advance
