Gstegman
10 W
I have been reading here for months, just joined today. I wanted to say hi and thank everyone for all the valuable information. I have an EEB frame and had thought I was going QS 273 but after a little reading it seems a QS 205 V3 50H is a little more suitable to my mission plan. I am leaning toward a Sabvoton controller but not sure about 150 vs 200A controller. 19" moto wheels, 72V 26 AH NCR cell pack 70A continuous, nothing groundbreaking... The goal here is to propel my 200lb arse 50+ mph with enough torque for throttle wheelies. I live in North Dallas area so largely flat so any input on the # of turns on the motor would be appreciated.
I have exchanged a few messages with a vendor named "ebike store"/ nbike on Aliexpress and would welcome any feedback from any who have dealt with them?
Any words of caution or advice on what I am attempting to build is certainly welcome. I have built a few custom motorcycles, have a small CNC mill and can weld, but this is my first ebike build attempt.
Thanks again,
I have exchanged a few messages with a vendor named "ebike store"/ nbike on Aliexpress and would welcome any feedback from any who have dealt with them?
Any words of caution or advice on what I am attempting to build is certainly welcome. I have built a few custom motorcycles, have a small CNC mill and can weld, but this is my first ebike build attempt.
Thanks again,