Power supply 24v 500w or 24 1000w for Hyperion 1420 ?

[999zip999]

O.k I order a 24v 1000w 47a power supply, and received 24v 575w 47a supply. The company sells both as I just found out today on their website. This is for my hyperion 1420 which takes up to a 27v 575w . Should I contact them first or do a paypal stop payment. Plus I'm thinking of getting a second 1420. And would two 24v 575w be enough power for these chargers or would a 24v 1000w be that much better ? These are 2 isolated power supplies HP's with 2 cords. If I had 2 - 24v 1000w can I run them on the same power strip thru a 115v 15a plug with these chargers hyperion 1420 ? Could I run 2-24v 575w power supplies four cords on one power strip ?

 

[ZOMGVTEK]

I'm assuming you are talking about the HP ESP-135 supplies. Those are rated at 575W each. Two of them are needed to get 24V, which would also double the power to a total of 1,150W.

 

[999zip999]

Zomgvtek you assumed Right. I got mixed up when I looked up their website and saw 3 side by side. Great wasn't sure you double volts and watts thanks. I can use them both ( 12v- 575w ) togethere on one power strip ? But can I use four on one power strip on a 15a wall plug, that I think trips at 12a ? What's isolated mean in a power supply and charger ? Triing to setup the menu on this hyperion has my head spinning. First RC charger. Thanks

 

[jonescg]

If you're going to be using it for mainly balancing, the 500 W supply will be just fine. If you plan on doing regular bulk charges with it as well, then the more powerful supply will be handy.