Lowberry
10 mW
I would like to start a place to talk about the options and parameters with this controller.
First off this controller is growing on me. I've had three sabvotons in service this is the first Kelly ive run. the software is a bit glitchy for me. the write fails often especially if I change any value to more than one box at a time. with patience it had always worked, whitch involves tuning off and on then restarting the program. the stock pase current was 100% and battery limit 50% it would cut out at full throttle in about 2 sec. with that value. Any one with some feed back on the best numbers for this. or is every on a bit different?my model is a qskls-s it has no led lights. is this some how diff from a led lit KLS-S
First off this controller is growing on me. I've had three sabvotons in service this is the first Kelly ive run. the software is a bit glitchy for me. the write fails often especially if I change any value to more than one box at a time. with patience it had always worked, whitch involves tuning off and on then restarting the program. the stock pase current was 100% and battery limit 50% it would cut out at full throttle in about 2 sec. with that value. Any one with some feed back on the best numbers for this. or is every on a bit different?my model is a qskls-s it has no led lights. is this some how diff from a led lit KLS-S
