ideaHex
1 mW
I just received my order from BMS Battery of a S06S 250W Torque Simulation Sine Wave Controller. The label states "DC36/48V". Is this a typo or have they changed the controller?
I purchased this to match up with a Q100CST 32 hole 201Rpm motor which is going into a 29er wheel. My ideal setup would have been this motor and controller running at 12 or 13S. But the BMS website states that it is a 36V controller and after reading this forum I was under the impression these controllers would not handle 48V. I had already purchased a 10S Lipo pack as I really wanted the torque simulation feature.
I thought I would post this in case anyone was in the same boat as me.
I purchased this to match up with a Q100CST 32 hole 201Rpm motor which is going into a 29er wheel. My ideal setup would have been this motor and controller running at 12 or 13S. But the BMS website states that it is a 36V controller and after reading this forum I was under the impression these controllers would not handle 48V. I had already purchased a 10S Lipo pack as I really wanted the torque simulation feature.
I thought I would post this in case anyone was in the same boat as me.