Sabvoton 72150 and qs 273 50 h hub motor wiring

[GOTL]

Hi everyone!
New here so hopefully posting this in the right place
I'm currently in the process of wiring in the sabvoton controller and qs motor.
I've got most of the wiring sorted but there are two plugs that I'm not sure about .
I've tried to contact qs and the company that I bought the sabvoton from and get no response at all .
Is there anyone here that's wired these already or is in the process??
Any help would be appreciated.
I'll try and upload a photo here of the wiring.

 

[st35326]

Post up a pic.

 

[GOTL]

I've tried to upload photo here. Keeps telling me it's too large

 

[GOTL]

 

[GOTL]

Ok I've managed to resize the photos now. There is a plug with red and orange wire .am I right in thinking this is for the ignition switch ? The other plug 3 wire pink , black, clear ? Not sure about this . Also this bike has a pas wire 3 wire black green and red . Anyone know where this would connect to on the sabvoton?
Thanks

 

[GOTL]

 

[GOTL]

ok ..continuing on with this wiring , another question ...ive just noticed that the colour tft screen connector has 5 wires but the connector from the controller has 6 wires ..the one wire that the screen hasnt got is the white wire that goes to the shunt .
question is ..have i got the wrong tft screen for this controller?