saiyan
100 W
hey guys just wondering if any1 has had the same problem i had with the sabvoton SVMC72200 (M) controller.
so i wired everything up did some testing on the stand and all was good. tuned it to about 25% power took it for a run it was all good. took it back and tuned it to factory setting which means max power, took it out, gave it abit and the front came up n thought ohhh thats nice then while rolling hit it once more and heard a boom!!!. at 1st after it blew the motor wasnt smooth while i was pushing it back home, it was rough so i thought dam the motor is gone. after i got home with further inspection i disconnected the yellow phase wire going to the controller and the motor was spinning freely. i has happend to me once b4 so correct me if im wrong but im pretty sure 1 of the fets has blown cause the wheel to not spin freely.
anybody have any inputs or more info regarding this please share. i will be contacting the person who sold it to me for a replacement.
so i wired everything up did some testing on the stand and all was good. tuned it to about 25% power took it for a run it was all good. took it back and tuned it to factory setting which means max power, took it out, gave it abit and the front came up n thought ohhh thats nice then while rolling hit it once more and heard a boom!!!. at 1st after it blew the motor wasnt smooth while i was pushing it back home, it was rough so i thought dam the motor is gone. after i got home with further inspection i disconnected the yellow phase wire going to the controller and the motor was spinning freely. i has happend to me once b4 so correct me if im wrong but im pretty sure 1 of the fets has blown cause the wheel to not spin freely.
anybody have any inputs or more info regarding this please share. i will be contacting the person who sold it to me for a replacement.