Hi guys!!
I'm new on here. I bought a stealth clone enduro ebike from China bout a year ago.. it's a 3000w rear wheel motor with 48V batt..
I was recently riding at relatively high speeds when one of the electric parts in the body (pos batt or controller) gave a violent shake and motor shutdown.. The bike still had power to the LCD just no response to the throttle.. I turned it off for a minute and back on that seem to do the trick to get it going again only for it to happen several more times on the way hm. Mainly when I throttled past a certain point.
Anyhow the next day I turn her on lifted the back Wheel and wrapped on full throttle there was a pop and a big spark come out from under the body somewhere and the motor powered down.. Haven't been able to get power to motor/throttle since..
There is a ERR 009 on the LCD and I also disconnected the batt and put a multi meter on it and it was reading 25V
My question is how do can i tell whether it's my Batt, controller or motor that is fuked? And how do i go about fixing the problem.. TBH I would prefer to just take it to a shop for them to fix but I'm in Perth, Western Australia and e bikes are a relatively new thing here.. I can't seem to find anyone who wants work on it.. most ebike shops here will only work on the bikes they bring in..
Anyhow any help u can throw my way would be greatly appreciated.. I'd love to get her back on the road ASAP.. TIA
I'm new on here. I bought a stealth clone enduro ebike from China bout a year ago.. it's a 3000w rear wheel motor with 48V batt..
I was recently riding at relatively high speeds when one of the electric parts in the body (pos batt or controller) gave a violent shake and motor shutdown.. The bike still had power to the LCD just no response to the throttle.. I turned it off for a minute and back on that seem to do the trick to get it going again only for it to happen several more times on the way hm. Mainly when I throttled past a certain point.
Anyhow the next day I turn her on lifted the back Wheel and wrapped on full throttle there was a pop and a big spark come out from under the body somewhere and the motor powered down.. Haven't been able to get power to motor/throttle since..
There is a ERR 009 on the LCD and I also disconnected the batt and put a multi meter on it and it was reading 25V
My question is how do can i tell whether it's my Batt, controller or motor that is fuked? And how do i go about fixing the problem.. TBH I would prefer to just take it to a shop for them to fix but I'm in Perth, Western Australia and e bikes are a relatively new thing here.. I can't seem to find anyone who wants work on it.. most ebike shops here will only work on the bikes they bring in..
Anyhow any help u can throw my way would be greatly appreciated.. I'd love to get her back on the road ASAP.. TIA