Stock Cyclone 3000W reverse?

[SwampDonkey]

Hey everyone!

Im going to be using a cyclone 3000W for a go cart. I see that these are capable of reverse and most are wired for it, but it looks like mine isnt. Its supposed to be a brown wire but mine is gone. Does anyone know where its solder point on the board is? I believe its a brown and black wire labeled as "reverse".

Thanks so much!

 

[Tommm]

Hey everyone!

Im going to be using a cyclone 3000W for a go cart. I see that these are capable of reverse and most are wired for it, but it looks like mine isnt. Its supposed to be a brown wire but mine is gone. Does anyone know where its solder point on the board is? I believe its a brown and black wire labeled as "reverse".

Thanks so much!

I changed the reverse in software on that controller before. Then I realized it will only spin 60% in reverse. Forget it, change the halls if you can according to this one. You only need the Judge rotation direction step.

 

[SwampDonkey]

Oh Im fine with 60% reverse. This is the non-bluetooth 40W controller so Im outta luck with the softwear.Its for a go-cart so it needs to be able to back up.

 

[Tommm]

Oh Im fine with 60% reverse. This is the non-bluetooth 40W controller so Im outta luck with the softwear.Its for a go-cart so it needs to be able to back up.

The use of the reverse is an actual reverse gear in that controller. By the way it is a yuyanking 40a.

Try writing in main cyclone topic (140 pages) , or you can try finding videos of it being opened up.