Bokonon
1 mW
Hi all, I have a Cyclone 3000W with the stock controller and it has this problem with the entire bracket "twisting" down and to the left. In other words, sitting on the bike looking down, the motor starts hanging low on the left side, as if the whole assembly has been twisting counterclockwise. This throws off the chainline on the right side (because the Cyclone sprocket is now tilted upwards) and I get chain derailments.
This seems to happen over time... it's good for several rides and then I have to re-mount it and bend everything back.
I've seen a lot of custom brackets and solutions for the "old" mount, but I have the newer mount (with the left bracket extending all the way to the left edge of the motor). I saw one with a piece of pipe in between the brackets.
Is there a good fix with off the shelf parts to keep this twisting from happening? Is it just a matter of fastening something in between the brackets?
This seems to happen over time... it's good for several rides and then I have to re-mount it and bend everything back.
I've seen a lot of custom brackets and solutions for the "old" mount, but I have the newer mount (with the left bracket extending all the way to the left edge of the motor). I saw one with a piece of pipe in between the brackets.
Is there a good fix with off the shelf parts to keep this twisting from happening? Is it just a matter of fastening something in between the brackets?
